Motorola WiNG 5.7.1 System Reference Manual page 453

• Set the RTS threshold value to 1 on all mesh devices. The default value is 65,536. For more information on defining radio
settings, see Access Point Radio
• Use Opportunistic as the rate selection settings for the AP7161 radio The default is Standard. For more information on
defining this setting, see
• Disable Dynamic Chain Selection (radio setting). The default value is enabled. This setting is disabled from the Command
Line Interface (CLI) using the
• Disable A-MPDU Aggregation if the intended vehicular speed is greater than 30 mph. For more information, see
Override Configuration.
Configuration.
Radio Override Configuration.
dynamic-chain-selection
command, or, in the UI (refer
5 - 369
Radio Override Configuration.
Radio