Motorola WiNG 5.7.1 System Reference Manual page 760

12 - 12 WiNG 5.7.1 Access Point System Reference Guide
4. Provide the following information to accurately define the location of the target device's firmware file:
Protocol
Port
Host
Path/File
User Name
Password
5. Select Apply
upgrade popup. The upgrade continues in the background.
6. The Basic link on the screen displays a simple interface with a text box to provide a
complete relative path to the file on a remote server in the
Select the protocol used for updating the firmware. Available options include:
• tftp
• ftp
• sftp
• http
• cf
• usb1
• usb2
• usb3
• usb4
• local
Use the spinner control or manually enter the value to define the port used by the
protocol for importing the firmware upgrade file. This option is not valid for local, cf,
usb1, usb2, usb3 and usb4.
Enter IP address or the hostname of the server used to import the firmware file. This
option is not valid for local, cf, usb1, usb2, usb3 and usb4. Use the drop-down to
select the type of host information. The host can be either an IP address or hostname.
A valid hostname cannot contain an underscore.
Specify the path to the firmware file. Enter the complete relative path to the file on
the server.
Define the user name used to access either a FTP or SFTP server.
This field is only available if the selected protocol is ftp or sftp.
Specify the user account password to access the FTP or a SFTP server.
This field is only available if the selected protocol is ftp or sftp.
to start the firmware update. Select
Figure 12-15 Firmware Upgrade - Basic screen
Abort to terminate the firmware update. Select
URL field. Click Apply
Close to close the
URL to the upgrade file. Enter the
to start the firmware update.