Motorola WiNG 5.7.1 System Reference Manual page 424

5 - 340 WiNG 5.7.1 Access Point System Reference Guide
Network
13. Select the Destination
back to the LAN are searched against to the records kept by the NAT engine. The destination IP address is changed back to
the specific internal private class IP address to reach the LAN over the network.
14. Select Add to create a new NAT destination configuration or
NAT destination configurations are not editable.
Select Inside or Outside NAT as the network direction. The default setting is Inside.
Select Inside to create a permanent, one-to-one mapping between an address on an
internal network and a perimeter or external network. To share a Web server on a
perimeter interface with the Internet, use static address translation to map the actual
address to a registered IP address. Static address translation hides the actual address of
the server from users on insecure interfaces. Casual access by unauthorized users
becomes much more difficult. Static NAT requires a dedicated address on the outside
network for each host. Inside NAT is the default setting.
tab to view destination NAT configurations and define packets passing through the NAT on the way
Figure 5-227 Device Overrides - NAT Destination screen
Delete to permanently remove a NAT destination. Existing