Ldap Agent Status - Motorola WiNG 5.7.1 System Reference Manual

Table of Contents

Advertisement

13.3.19 LDAP Agent Status

Access Point Statistics
When LDAP has been specified as an external resource (as opposed to local access point RADIUS resources) to validate PEAP-
MS-CHAP v2 authentication requests, user credentials and password information needs to be made available locally to
successfully connect to the external LDAP server. Up to two LDAP Agents (primary and secondary external resources) can be
defined as external resources for PEAP-MS-CHAP v2 authentication requests.
AP6511 and AP6521 model access point do not support this feature in Standalone AP or Controller AP mode. However, AP6511
and AP6521 models are supported when adopted and managed by a controller or service platform.
For more information on setting LDAP agents as part of the RADIUS server policy, see
9-48.
To view access point LDAP agent statistics:
1. Select the
Statistics
2. Select
System
connected access points.
3. Select
LDAP Agent
The
LDAP Agent Status
LDAP Agent Primary
LDAP Agent Secondary
Message
menu from the Web UI.
from the navigation pane (on the left-hand side of the screen). Expand a RF Domain and select one of its
Status.
Figure 13-67 Access Point - LDAP Agent Status screen
screen displays the following:
Lists the primary IP address of a remote LDAP server resource used by the access point to
validate PEAP-MS-CHAP v2 authentication requests. When a RADIUS server policy's data
source is set to LDAP, this is the first resource for authentication requests.
Lists the secondary IP address of a remote LDAP server resource used by the access point
to validate PEAP-MS-CHAP v2 authentication requests. When a RADIUS server policy's
data source is set to LDAP, this is the second resource for authentication requests.
Displays any system message generated in the access point's connection with the primary
or secondary LDAP agent. If there is a problem with the username and password used to
connection to the LDAP agent, it would be listed here.
Configuring the RADIUS Server on page
13 - 115

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents