Motorola WiNG 5.7.1 System Reference Manual page 517

6. Refer to the Advanced RADIUS Configuration
Authorization.
NAS Identifier
NAS Port
RADIUS Dynamic
Authorization
7. Refer to the Radio Rates
Figure 6-23 Advanced WLAN - Rate Settings 2.4 GHz-WLAN screen
8. For 2.4 GHz WLAN radio transmission rate settings, define the minimum Basic and Supported rates in the
802.11g Rates and 802.11n Rates
If supporting 802.11n, select a Supported MCS index. Set a MCS (modulation and coding scheme) in respect to the radio's
channel width and guard interval. A MCS defines (based on RF channel conditions) an optimal combination of 8 data rates,
bonded channels, multiple spatial streams, different guard intervals and modulation types. Clients can associate as long as
they support basic MCS (as well as non-11n basic rates).
field to set the WLAN's NAS configuration and RADIUS Dynamic
Specify what is included in the RADIUS NAS-Identifier field for authentication and
accounting packets. This is an optional setting, and defaults are used if no values are
provided.
The profile database on the RADIUS server consists of user profiles for each connected
network access server (NAS) port. Each profile is matched to a user name representing a
physical port. When the access point authorizes users, it queries the user profile database
using a user name representative of the physical NAS port making the connection.
Select this check box to enable the RADIUS protocol to support unsolicited messages sent
from the RADIUS server. These messages allow administrators to issue change of
authorization (CoA) messages, which affect session authorization, or Disconnect Message
(DM), which cause a session to terminate immediately. This option is disabled by default.
field to define selected data rates for both the 2.4 GHz and 5.0 GHz bands.
sections. These rates are applicable to client traffic associated with this WLAN only.
6 - 47
802.11b Rates,