Motorola WiNG 5.7.1 System Reference Manual page 774

12 - 26 WiNG 5.7.1 Access Point System Reference Guide
4. Refer to the following to determine whether a firmware image needs requires an update:
Firmware Version
Build Date
Install Date
Fallback
Current Boot
Upgrade Status
5. Select Firmware Upgrade
information, see
6. Select Reload
Figure 12-40 Device Details screen
Displays the Primary and Secondary firmware image version currently utilized by the
selected access point.
Displays the date the Primary and Secondary firmware image was built for the
selected device.
Displays the date the firmware was installed on the access point.
Lists whether fallback is currently enabled for the selected device. When enabled,
the device reverts back to the last successfully installed firmware image if something
were to happen in its next firmware upgrade that would render the device
inoperable.
Lists whether the primary or secondary firmware image is to be applied the next time
the device boots.
Displays the status of the last firmware upgrade. For information on upgrading device
firmware, see
to upgrade the device's firmware to display the Firmware Upgrade screen. For more
Upgrading Device Firmware on page
to restart the device.
Upgrading Device Firmware on page
12-11.
12-11.