Motorola WiNG 5.7.1 System Reference Manual page 575

11. Set the following From Air Upstream Random Early Detection Threshold
Background Traffic
Best Effort Traffic
Video Traffic
Voice Traffic
12. Configure the following parameters in respect to the intended
to associated access point radios and the wireless client:
Neighbor Tx Rate Limit
Rate
Maximum Burst Size
13. Set the following To Air Downstream Random Early Detection Threshold
Background Traffic
Best Effort Traffic
Video Traffic
Voice Traffic
Set a percentage value for background traffic in the transmit direction. This is a
percentage of the maximum burst size for low priority traffic. Background traffic exceeding
the defined threshold is dropped by the client and a log message is generated. The default
threshold is 50%.
Set a percentage value for best effort traffic in the transmit direction. This is a percentage
of the maximum burst size for normal traffic. Best effort traffic exceeding the defined
threshold is dropped by the client and a log message is generated. The default threshold
is 50%.
Set a percentage value for video traffic in the transmit direction. This is a percentage of
the maximum burst size for video traffic. Video traffic exceeding the defined threshold is
dropped by the client and a log message is generated. The default threshold is 25%.
Set a percentage value for voice traffic in the receive direction. This is a percentage of the
maximum burst size for voice traffic. Voice traffic exceeding the defined threshold is
dropped by the client and a log message is generated. The default threshold is 0%. 0%
implies no early random drops will occur.
Select this radio button to enable rate limiting for data transmitted from connected
wireless clients. Enabling this option does not invoke rate limiting for data traffic in the
transmit direction. This feature is disabled by default.
Define a receive rate limit from 50 - 1,000,000 kbps. This limit constitutes a threshold for
the maximum the number of packets transmitted or received by the client. Traffic that
exceeds the defined rate is dropped and a log message is generated. The default rate is
1,000 kbytes.
Set a maximum burst size from 2 - 64 kbytes. The smaller the burst, the less likely the
receive packet transmission will result in congestion for the wireless client. The default
burst size is 64 kbytes.
Set a percentage value for background traffic in the receive direction. This is a percentage
of the maximum burst size for low priority traffic. Background traffic exceeding the defined
threshold is dropped by the client and a log message is generated. The default is 50%.
Set a percentage value for best effort traffic in the receive direction. This is a percentage
of the maximum burst size for normal traffic. Best effort traffic exceeding the defined
threshold is dropped by the client and a log message is generated. The default is 50%.
Set a percentage value for video traffic in the receive direction. This is a percentage of the
maximum burst size for video traffic. Video traffic exceeding the defined threshold is
dropped by the client and a log message is generated. The default is 25%.
Set a percentage value for voice traffic in the receive direction. This is a percentage of the
maximum burst size for voice traffic. Voice traffic exceeding the defined threshold is
dropped by the client and a log message is generated. The default threshold is 0%.0%
means no early random drops will occur.
settings for each access category:
To Air Downstream Rate Limit,
settings for each access category:
6 - 105
or traffic from a controller