Motorola WiNG 5.7.1 System Reference Manual page 772

12 - 24 WiNG 5.7.1 Access Point System Reference Guide
Figure 12-39 Device Browser - Options for Devices - Troubleshooting menu - Packet Capture screen
5. Use the Send Data To
When File is selected, the captured debug events are stored on a file and then saved to a remote location using either the
FTP or TFTP protocols. Use the screen to provide the appropriate information to save the file on the remote server.
6. Refer to the following
Transiting an
Ethernet Bridge
Dropped
Interface
On a Radio (802.11)
7. Refer to the following
Filter by MAC
drop-down to select the destination for the captured packets. Select from Screen or File.
Capture Locations options:
Select this to enable capture of packets traversing an ethernet bridge.
Select this to enable to capture dropped packets.
Select this to enable capture packets on specific interfaces. The interfaces can be select from
the drop-down list. Select the interface number from the spinner control.
Use the Packet Direction drop-down to configure the direction the packet traverses.
Select this option to enable capture packets on specific radios. Depending on the device, the
number of radios available for selection will differ. Select from All, Radio 1, Radio 2 or Radio 3.
Use the Packet Direction drop-down to configure the direction the packet traverses.
Filter options:
Select this to enable filtering the capture of packets based on the MAC address of a device.