Motorola WiNG 5.7.1 System Reference Manual page 766

12 - 18 WiNG 5.7.1 Access Point System Reference Guide
5. The Tech Support Dump file can be sent using ftp or tftp.
Provide the following information when transferring files using the ftp protocol.
Target
Port
Host/IP
User
Password
Path (Optional)
Provide the following information when transferring files using the tftp protocol.
Target
Port
Host/IP
Path (Optional)
6. Use the OK button to begin file transfer. Use the
Figure 12-27 Copy Tech Support Dump screen
This is the protocol used for file transfer. Select ftp.
This is the port used by the FTP server. The default and standard port is 21. If the FTP
server uses a non standard port, use the spinner to select it.
Use this field to provide the hostname or the IP address of the FTP server.
Use this field to provide the user credentials to authenticate on the FTP server.
Use this field to provide the authentication password for the user credentials provided
in the User field.
Optionally, provide the complete path to the directory on the FTP server where the Tech
Support Dump file is to be placed.
This is the protocol used for file transfer. Select tftp.
This is the port used by the TFTP server. The default and standard port is 69. If the TFTP
server uses a non standard port, use the spinner to select it.
Use this field to provide the hostname or the IP address of the TFTP server.
Optionally, provide the complete path to the directory on the TFTP server where the
Tech Support Dump file is to be placed.
Close to exit this screen.