Motorola WiNG 5.7.1 System Reference Manual page 672

9 - 4 WiNG 5.7.1 Access Point System Reference Guide
6. Define the following
Captive Portal Policy
Captive Portal Server
Mode
Hosting VLAN Interface
Figure 9-2 Captive Portal Policy screen - Basic Configuration tab
Settings for the captive portal policy:
If creating a new policy, assign a name representative of its access permissions, location
or intended wireless client user base. If editing an existing captive portal policy, the policy
name cannot be modified. The name cannot exceed 32 characters.
Set the mode as Internal (Self), Centralized or Centralized Controller. Select Internal (Self)
to maintain the captive portal configuration (Web pages) internally on the access point.
Select External (Centralized) if the captive portal is supported on an external server. Select
Centralized Controller for the captive portal to reside on the access point's connected
Virtual Controller AP. The default value is Internal (Self).
When Centralized Server is selected as the Captive Portal Server Mode, use the spinner
control to set the VLAN where the client can reach the controller. 0 is the default value.