Dhcp Options - Motorola WiNG 5.7.1 System Reference Manual

13 - 132 WiNG 5.7.1 Access Point System Reference Guide
The IPv6 Multicast Router (MRouter)
VLAN
MiNT IDs
Learn Mode
Port Members
Query Interval
Version
Refresh

13.3.23.7 DHCP Options

Network
Supported access points can use a DHCP server resource to provide the dynamic assignment of IP addresses automatically.
This is a protocol that includes IP address allocation and delivery of host-specific configuration parameters from a DHCP server
to a host. Some of these parameters are IP address, gateway and network mask.
The DHCP Options screen provides the DHCP server name, image file on the DHCP server, and its configuration.
To view a network's DHCP Options:
1. Select the Statistics
2. Select System
connected access points.
3. Select Network
4. Select DHCP
field describes the following:
Displays the group VLAN where the multicast transmission is conducted.
Lists MiNT IDs for each listed VLAN. MiNT provides the means to secure communications at
the transport layer. Using MiNT, a controller or service platform can be configured to only
communicate with other authorized (MiNT enabled) devices.
Displays the learning mode used by the router as either Static or PIM-DVMRP.
Displays the physical ports on which multicast clients have been discovered by the multicast
router. For example, ge1, radio1, etc. Ports can vary somewhat amongst supported controller
and service platform models.
Lists the query interval implemented when the querier functionality is enabled. The default
value is 60 seconds.
Lists the multicast router version compatibility as either version 1, 2 or 3. The default setting
is 3.
Select the Refresh button to update the screen's statistics counters to their latest values.
menu from the Web UI.
from the navigation pane (on the left-hand side of the screen). Expand a RF Domain and select one of its
and expand the menu to reveal its sub menu
Options.
items.