Motorola WiNG 5.7.1 System Reference Manual page 855

Age
The Security tab displays the following:
Mesh Point Name
Destination Addr
Radio Interface
Interface ID
State
Timeout
Keep Alive
The Proxy tab displays the following:
Mesh Point Name
Destination Addr
Proxy Address
Age
Proxy Owner
Persistence
VLAN
10. Select the Device Brief Info
The Device Brief Info screen is divided into 2 fields,
Displays the number of mili seconds since the mesh point last heard from this neighbor.
Displays the name of each configured mesh point in the RF Domain.
The destination is the endpoint of mesh path. It may be a MAC address or a mesh point ID.
This indicates the interface that is used by the device to communicate with this neighbor.
The values are 2.4 and 5.0, indicating the frequency of the radio that is used to
communicate with the neighbor.
The IFID uniquely identifies an interface associated with the MPID. Each mesh point on a
device can be associated with one or more interfaces.
Displays the Link State for each mesh point:
• Init - indicates the link has not been established or has expired.
• Enabled - indicates the link is available for communication.
• Failed - indicates the attempt to establish the link failed and cannot be retried yet.
• In Progress - indicates the link is being established but is not yet available.
Displays the maximum value in seconds that the link is allowed to stay in the In Progress
state before timing out.
Yes indicates that the local MP will act as a supplicant to authenticate the link and not let
it expire (if possible). No indicates that the local MP does not need the link and will let it
expire if not maintained by the remote MP.
Displays the name of each configured mesh point in the RF Domain.
The destination is the endpoint of mesh path. It may be a MAC address or a mesh point ID.
Displays the MAC Address of the proxy used in the mesh point.
Displays the age of the proxy connection for each of the mesh points in the RF Domain.
The owner's (MPID) is used to distinguish the neighbor device.
Displays the persistence (duration) of the proxy connection for each of the mesh points in
the RF Domain.
The VLAN ID used as a virtual interface with this proxy. A value of 4095 indicates that
there is no VLAN ID.
tab from the top of the screen.
All Roots and Mesh Points and MeshPoint Details.
13 - 39