Motorola WiNG 5.7.1 System Reference Manual page 938

13 - 122 WiNG 5.7.1 Access Point System Reference Guide
5. Review the following
Name
Auth SM
Auth VLAN
BESM
Client MAC
Guest VLAN
Host
Pstatus
6. Refer to the MacAuth
7. Review the following
Name
Authorized
Enabled
MAC Auth
8. Select the Refresh
Dot1x Auth Ports utilization information:
Lists the access point ge ports subject to automatic connection and authentication using
Dot1x.
Lists the current authentication state of the listed port.
Lists the virtual interface utilized post authentication.
Lists whether an authentication request is pending on the listed port.
Lists the MAC address of requesting clients seeking authentication over the listed port.
Lists the guest VLAN utilized for the listed port. This is the VLAN traffic is bridged on if the
port is unauthorized and guest VLAN globally enabled.
Lists whether the host is a single entity or not.
Lists whether the listed port has been authorized for Dot1x network authentication.
table to assess the AAA policy applied to MAC authorization requests.
MAC Auth Ports utilization information:
Lists the access point ge ports subject to automatic connection and MAC authentication using
Dot1x.
Lists whether MAC authorization using Dot1x has been authorized (permitted) on the listed ge
port. A green checkmark designates Dot1x authorization as authorized. A red X defines
authorization as disabled.
Lists whether MAC authorization using Dot1x has been enabled on the listed ge port. A green
checkmark designates Dot1x authorization as allowed. A red X defines authorization as
disabled.
Lists the MAC address corresponding to the listed access point port interface on which
authentication requests are made.
button to update the screen's statistics counters to their latest value.