Motorola WiNG 5.7.1 System Reference Manual page 804

12 - 56 WiNG 5.7.1 Access Point System Reference Guide
5. Select OK to generate the RSA key. Select
Key Name
Key Size
6. To optionally import a RSA Key, select the
7. Define the following configuration parameters required for the import of the RSA key:
Key Name
Key Passphrase
URL
Cancel
Enter the 32 character maximum name assigned to the RSA key.
Use the spinner control to set the size of the key (between 1,024 - 2,048 bits). It is
recommended leaving this value at the default setting of 1024 to ensure optimum
functionality.
Import
Figure 12-64 Certificate Management - Import New RSA Key screen
Enter the 32 character maximum name assigned to identify the RSA key.
Define the key used by the server (or repository) of the target RSA key. Select the Show
textbox to expose the actual characters used in the passphrase. Leaving the option
unselected displays the passphrase as a series of asterisks "*".
Provide the complete URL to the location of the RSA key. If needed, select Advanced to
expand the dialog to display network address information to the location of the target key.
The number of additional fields that populate the screen is dependent on the selected
protocol.
to revert the screen to its last saved configuration.
button from the RSA Keys screen.