Ford 2003 Mustang Workshop Manual page 1566

44. Install the oil pan and gasket, and loosely install the bolts.
45. Tighten the bolts in the sequence shown, in two stages.
Stage 1: Tighten to 20 Nm (15 lb-ft).
Stage 2: Rotate an additional 60 degrees.
46. NOTE: If the engine front cover is not secured within four minutes, the sealant must be removed
and the sealing area cleaned with metal surface cleaner. Allow to dry until there is no sign of
wetness, or four minutes, whichever is longer. Failure to follow this procedure can result in
future oil leakage.
Apply silicone gasket and sealant in the locations shown.