Ford 2003 Mustang Workshop Manual page 1548

5. Inspect the CAC plenum gasket and install a new gasket if necessary.
6. To assemble, reverse the disassembly procedure
7. Tighten the supercharger and CAC cooler assembly-to-lower intake manifold bolts, in the
sequence shown, in two stages.
1. Stage 1: Tighten to 2 Nm (18 lb-in).
2. Stage 2: Tighten to 25 Nm (18 lb-ft).
8. Tighten the coolant supply and return manifold in two stages.
1. Stage 1: Tighten to 10 Nm (89 lb-ft).
2. Stage 2: Tighten an additional 90 degrees.