Table of Contents
Advertisement
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
no port lacpmode all
This command disables Link Aggregation Control Protocol (LACP) on all ports.
Format
Mode
port-channel
This command configures a new port-channel (LAG) and generates a logical slot and port number
for it. Display this number using the "show port-channel".
Note: Before including a port in a port-channel, set the port physical mode. See 'speed' command.
Format
Mode
port-channel adminmode
This command enables a port-channel (LAG). The interface is a logical slot and port for a
configured port-channel. The option
administrative mode setting.
Format
Mode
no port-channel adminmode
This command disables a port-channel (LAG). The interface is a logical slot and port for a
configured port-channel. The option
administrative mode setting.
Format
Mode
port-channel linktrap
This command enables link trap notifications for the port-channel (LAG). The interface is a logical
slot and port for a configured port-channel. The option
with the same administrative mode setting.
8-42
no port lacpmode all
Global Config
port-channel <name>
Global Config
every configured port-channel with the same
all sets
port-channel adminmode {<logical slot/port> | all}
Global Config
every configured port-channel with the same
all sets
no port-channel adminmode {<logical slot/port> | all}
Global Config
202-10009-01_060204
every configured port-channel
all sets
Switching Commands
Advertisement
Table of Contents
