User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
•
Smart Wizard
Secondary Menus
The Secondary Menus under the Main Menu contain a host of options that you can use to
configure your switch. The online help contains a detailed description of the features on each
screen. You can click the 'help' or the question mark at the top right of each screen to view the
help menu topics.
The Secondary Menus are detailed below, with cross-references to the sections in this manual that
contain the corresponding command descriptions.
Management
•
System — see
•
Utilities — see
•
Access — see the following sections:
•
"Administration Console Telnet Interface" on page 3-1
•
"Management Commands" on page 8-18
•
Security — see
Commands" on page 8-90
•
Port Access Control —
•
RADIUS — see
•
PoE — see
Switch
•
Port — see
"show port" on page 8-61
•
MAC Addresses — see
•
Spanning Tree — see
•
Link Aggregation — see
•
VLAN — see
•
Mcast Fwding DB — see
Web-Based Management Interface
"System Information and Statistics Commands" on page 8-1
"System Utilities" on page 8-112
"Security Commands" on page 8-95
"show dot1x" on page 8-106
"show radius statistics" on page 8-110
"FSM7326P Power Over Ethernet Commands" on page 13-1
"System Information and Statistics Commands" on page 8-1
"Spanning Tree Commands" on page 8-77
"Device Configuration Commands" on page 8-38
"show vlan" on page 8-63
"show forwardingdb agetime" on page 8-23
202-10009-01_060204
and
"User Account Management
4-7