Port Lacpmode; Port Lacpmode Enable All - NETGEAR ProSAFE M7100-24X Reference Manual

ProSAFE M7100 Managed Switches
static mode for a new port-channel enabled, which means the port-channel is static. You can only
use this command on port-channel interfaces.
Default disabled
Format
port-channel static
Mode Interface Config
no port-channel static
This command sets the static mode on a particular port-channel (LAG) interface to the default
value. This command will be executed only for interfaces of type port-channel (LAG).
Format
no port-channel static
Mode Interface Config

port lacpmode

This command enables Link Aggregation Control Protocol (LACP) on a port.
Default enabled
Format
port lacpmode
Mode Interface Config
no port lacpmode
This command disables Link Aggregation Control Protocol (LACP) on a port.
Format
no port lacpmode
Mode Interface Config

port lacpmode enable all

This command enables Link Aggregation Control Protocol (LACP) on all ports.
Format
port lacpmode enable all
Mode Global Config
no port lacpmode enable all
This command disables Link Aggregation Control Protocol (LACP) on all ports.
Format
no port lacpmode enable all
Mode Global Config
Switching Commands
84