User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
spanning-tree bpdumigrationcheck
This command enables BPDU migration check on a given interface. The all option enables BPDU
migration check on all interfaces.
Format
Mode
no spanning-tree bpdumigrationcheck
This command disables BPDU migration check on a given interface. The all option disables
BPDU migration check on all interfaces.
Format
Mode
speed
This command sets the speed and duplex setting for the interface.
Format
Interface Config
Acceptable values are:
100h
100f
10h
10f
speed all
This command sets the speed and duplex setting for all interfaces.
Format
8-68
spanning-tree bpdumigrationcheck {<slot/port> | all}
Global Config
no spanning-tree bpdumigrationcheck {<slot/port> |
all}
Global Config
speed {{100 | 10} {half-duplex | full-duplex} | 1000
full-duplex}
Mode
100BASE-T half-duplex
100BASE-T full duplex
10BASE-T half duplex
100BASE-T full duplex
speed all {{100 | 10} {half-duplex | full-duplex} |
1000 full-duplex}
202-10009-01_060204
Switching Commands