User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
no vlan pvid
This command sets the VLAN ID per interface to 1.
Format
Mode
vlan tagging
This command configures the tagging behavior for a specific interface in a VLAN to enabled. If
tagging is enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is
transmitted as untagged frames. The ID is a valid VLAN identification number.
Format
Mode
no vlan tagging
This command configures the tagging behavior for a specific interface in a VLAN to disabled. If
tagging is disabled, traffic is transmitted as untagged frames. The ID is a valid VLAN
identification number.
Format
Mode
Spanning Tree Commands
This section provides detailed explanation of the spanning tree commands. The commands are
divided into two functional groups:
•
Show commands display spanning tree settings, statistics, and other information.
•
Configuration Commands configure features and options of the switch. For every
configuration command there is a show command that displays the configuration setting.
show spanning-tree
This command displays spanning tree settings for the common and internal spanning tree, when
the optional parameter "brief" is not included in the command. The following details are
displayed.
Switching Commands
no vlan pvid <1-4094>
Interface Config
vlan tagging <1-4094>
Interface Config
no vlan tagging <1-4094>
Interface Config
202-10009-01_060204
8-77