No Match Class-Map; Match Destination-Address Mac - NETGEAR 7300 Series User Manual

Layer 3 managed switch software
Hide thumbs Also See for 7300 Series:
Table of Contents

Advertisement

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Restrictions

no match class-map

This command removes from the specified class definition the set of match conditions defined for
another class. The <
refclassname>
are being referenced by the specified class definition.
Note: There is no [
not]
Default
Format
Mode

match destination-address mac

This command adds to the specified class definition a match condition based on the destination
MAC address of a packet. The <macaddr> parameter is any layer 2 MAC address formatted as six,
two-digit hexadecimal numbers separated by colons (e.g., 00:11:22:dd:ee:ff). The <
parameter is a layer 2 MAC address bit mask, which need not be contiguous, and is formatted as
six, two-digit hexadecimal numbers separated by colons (e.g., ff:07:23:ff:fe:dc). The optional [
parameter has the effect of negating this match condition for the class (i.e., match all destination
MAC addresses except for what is specified here).
10-6
The class types of both <
be identical (i.e., any vs. any, or all vs. all). A class type of acl is
not supported by this command.
Cannot specify
self-referencing of class name not allowed).
At most one other class may be referenced by a class.
Any attempt to delete the <
enced by any <
The combined match criteria of <
must be an allowed combination based on the class type.
name>
Any subsequent changes to the <
teria must maintain this validity, or the change attempt shall fail.
The total number of class rules formed by the complete reference
class chain (includes both predecessor and successor classes)
must not exceed a platform-specific maximum.
In some cases, each removal of a refclass rule reduces the maxi-
mum number of available rules in the class definition by one.
is the name of an existing DiffServ class whose match conditions
option for this match command.
None
no match class-map <refclassname>
Class-Map Config
202-10009-01_060204
classname>
the same as <
<refclassname>
refclassname>
> shall fail.
classname
classname>
refclassname>
CLI Commands: Differentiated Services
and <
refclassname>
classname>
class while still refer-
and <
refclass-
class match cri-
macmask>
must
(i.e.,
not]

Advertisement

Table of Contents
loading

Table of Contents