No Set Garp Timer Leaveall All; Set Gmrp Adminmode; No Set Gmrp Adminmode; Set Gmrp Interfacemode - NETGEAR 7300 Series User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

no set garp timer leaveall all

This command sets how frequently Leave All PDUs are generated for all ports to 1000
centiseconds (10 seconds).
Note: This command has an effect only when GVRP is enabled.
Format
Mode

set gmrp adminmode

This command enables GARP Multicast Registration Protocol (GMRP) on the system. The default
value is disable.
Format
Mode

no set gmrp adminmode

This command disables GARP Multicast Registration Protocol (GMRP) on the system.
Format
Mode
et gmrp interfacemode
s
This command enables GARP Multicast Registration Protocol on a selected interface. If an
interface which has GARP enabled is enabled for routing or is enlisted as a member of a port-
channel (LAG), GARP functionality will be disabled on that interface. GARP functionality will
subsequently be re-enabled if routing is disabled and port-channel (LAG) membership is removed
from an interface that has GARP enabled.
Default
Format
Mode
8-48
no set garp timer leaveall all
Global Config
set gmrp adminmode
Privileged EXEC
no set gmrp adminmode
Privileged EXEC
Disabled

set gmrp interfacemode

Interface Config
202-10009-01_060204
Switching Commands