User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Active Ports
show storm-control
This command displays switch configuration information.
Format
Mode
Broadcast Storm Recovery Mode May be enabled or disabled. The factory default is
802.3x Flow Control Mode May be enabled or disabled. The factory default is disabled.
show vlan
This command displays detailed information, including interface information, for a specific
VLAN.
Format
Mode
VLAN ID
VLAN Name
VLAN Type
slot/port
Current
Switching Commands
This field lists the ports that are actively participating in the port-
channel (LAG).
show storm-control
Privileged EXEC
disabled.
show vlan <vlanid>
tion number
Privileged EXEC and User EXEC
There is a VLAN Identifier (VID) associated with each VLAN.
The range of the VLAN ID is 1 to 4094.
A string associated with this VLAN as a convenience. It can be
up to 16 alphanumeric characters long, including blanks. The
default is blank. VLAN ID 1 always has a name of `Default`. This
field is optional.
Type of VLAN, which can be Default, (VLAN ID = 1), a static
(one that is configured and permanently defined), or Dynamic
(one that is created by GVRP registration).
Indicates by slot id and port number which port is controlled by
the fields on this line. It is possible to set the parameters for all
ports by using the selectors on the top line.
Determines the degree of participation of this port in this VLAN.
The permissible values are:
Include - This port is always a member of this VLAN. This is
equivalent to registration fixed in the IEEE 802.1Q standard.
202-10009-01_060204
, where the ID is a valid VLAN identifica-
8-63