User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
no dot1x timeout
This command sets the value, in seconds, of the timer used by the authenticator state machine on
this port to the default values. Depending on the token used, the corresponding default values are
set.
Format
Mode
dot1x user
This command adds the specified user to the list of users with access to the specified port or all
ports. The <user> parameter must be a configured user.
Format
Mode
no dot1x user
This command removes the user from the list of users with access to the specified port or all ports.
Format
Mode
radius accounting mode
This command is used to enable the RADIUS accounting function.
Default
Format
Mode
no radius accounting mode
This command is used to set the RADIUS accounting function to the default value - i.e. the
RADIUS accounting function is disabled.
Format
Mode
Switching Commands
no dot1x timeout {reauth-period | quiet-period | tx-period | supp-
timeout | server-timeout}
Interface Config
dot1x user <user> {<slot/port> | all}
Global Config
no dot1x user <user> {<slot/port> | all}
Global Config
Disabled
radius accounting mode
Global Config
no radius accounting mode
Global Config
202-10009-01_060204
8-101