Default-Router; No Default-Router; Dns-Server; No Dns-Server - NETGEAR 7300 Series User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Format
Mode

default-router

This command specifies the default router list for a DHCP client. {address1, address2... address8}
are valid IP addresses, each made up of four decimal bytes ranging from 0 to 255. IP address
0.0.0.0 is invalid.
Default
Format
Mode

no default-router

This command removes the default router list.
Format
Mode

dns-server

This command specifies the IP servers available to a DHCP client. address1, address2... address8
are valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP address
0.0.0.0 is invalid.
Default
Format
Mode

no dns-server

This command removes the DNS Server list.
Format
Mode
12-2
no client-name
DHCP Pool Config Mode
None
default-router <address1> [<address2>....<address8>]
DHCP Pool Config
no default-router
DHCP Pool Config
None
dns-server <address1> [<address2>....<address8>]
DHCP Pool Config Mode
no dns-server
DHCP Pool Config Mode
202-10009-01_060204
DHCP Server Commands