User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Mode
no shutdown
This command enables a port.
Format
Mode
shutdown all
This command disables all ports.
Default
Format
Mode
no shutdown all
This command enables all ports.
Format
Mode
snmp trap link-status
This command enables link status traps by interface.
Note: This command is valid only when the Link Up/Down Flag is enabled. See 'snmp-server
enable traps linkmode' command.
Format
Mode
no snmp trap link-status
This command disables link status traps by interface.
Note: This command is valid only when the Link Up/Down Flag is enabled. See 'snmp-server
enable traps linkmode' command).
Format
8-66
Interface Config
no shutdown
Interface Config
Enabled
shutdown all
Global Config
no shutdown all
Global Config
snmp trap link-status
Interface Config
no snmp trap link-status
202-10009-01_060204
Switching Commands