User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Quick Start up Downloading from Out-of-Band PC to Switch
(Only XMODEM)
Table 6-6.
Quick Start up Downloading from Out-of-Band PC to Switch (Only XMODEM)
Command
copy <url> {nvram:startup-config |
system:image}
Quick Start up Downloading from TFTP Server
Before starting a TFTP server download, the operator must complete the Quick Start up for the IP
Address.
Table 6-7.
Quick Start up Downloading from TFTP Server
Command
copy <url> {nvram:startup-config |
system:image}
6-6
Details
Sets the download datatype to be an image or
config file.
The URL must be specified as:
xmodem:filepath/fileName
For example:
If the user is using HyperTerminal, the user
must specify which file is to be sent to the
switch.
The Switch will restart automatically once the
code has been downloaded.
Details
Sets the download datatype to be an image
or config file.
The URL must be specified as:
tftp://ipAddr/filepath/fileName.
The nvram:startup-config option downloads
the config file using tftp and system:image
option downloads the code file.
202-10009-01_060204
Quick Start up