Table of Contents
Advertisement
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Designated Root
Root Path Cost
Root Port Identifier
Associated FIDs
Associated VLANs
show spanning-tree mst port detailed
This command displays the detailed settings and parameters for a specific switch port within a
particular multiple spanning tree instance. The instance <mstid> is a number that corresponds to
the desired existing multiple spanning tree instance. The <slot/port> is the desired switch port.
Format
Mode
MST Instance ID
Port Identifier
Port Priority
Port Forwarding State
Port Role
Port Path Cost
Designated Root
Designated Port Cost
Designated Bridge
Designated Port Identifier
LAN
If 0 (defined as the default CIST ID) is passed as the <mstid>, then this command displays the
settings and parameters for a specific switch port within the common and internal spanning tree.
The <slot/port> is the desired switch port. In this case, the followig are displayed.
8-80
Identifier of the Regional Root for this multiple spanning tree
instance.
Path Cost to the Designated Root for this multiple spanning tree
instance
Port to access the Designated Root for this multiple spanning tree
instance
List of forwarding database identifiers associated with this
instance.
List of VLAN IDs associated with this instance.
show spanning-tree mst port detailed <mstid> <slot/port>
Privileged EXEC and User EXEC
Current spanning tree state of this port
Configured value of the Internal Port Path Cost parameter
The Identifier of the designated root for this port.
Path Cost offered to the LAN by the Designated Port
B
ridge Identifier of the bridge with the Designated Port.
Port on the Designated Bridge that offers the lowest cost to
the
202-10009-01_060204
Switching Commands
Advertisement
Table of Contents
