User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
vlan priority
This command configures the default 802.1p port priority assigned for untagged packets for a
specific interface. The range for the priority is 0-7
Default
Format
Mode
LAG/Port-Channel (802.3ad) Commands
port-channel staticcapability
This command enables the support of port-channels (static link aggregations - LAGs) on the
device. By default, the static capability for all port-channels is disabled.
Default
Format
Mode
no port-channel staticcapability
This command disables the support of static port-channels (link aggregations - LAGs) on the
device.
Default
Format
Mode
show port-channel brief
This command displays the static capability of all port-channels (LAGs) on the device as well as a
summary of individual port-channels.
Format
Mode
Switching Commands
0
vlan priority <priority>
Interface Config
Disabled
port-channel staticcapability
Global Config
Disabled
no port-channel staticcapability
Global Config
show port-channel brief
Privileged EXEC and User EXEC
202-10009-01_060204
8-17