NETGEAR 7300 Series User Manual page 60

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Table 7-1. Command Mode (continued)
Command Mode
VLAN Mode
Global Config Mode
Interface Config Mode
Line Config Mode
Policy Map Mode
Policy Class Mode
Class Map Mode
Router Config OSPF
Mode
7-2
Access Method
From the Privileged
User Exec mode, enter
vlan database
the
command.
From the Privileged
Exec mode, enter the
configure
command.
From the Global
Configuration mode,
enter the interface
config <slot/port>
command.
From the Global
Configuration mode,
lineconfig
enter the
command.
From the Global
Configuration mode,
policy map
enter the
command.
From the Policy Map
class
mode enter the
command.
From the Global Config
class-
mode, enter the
map command.
From the Global
Configuration mode,
enter the router ospf
command
202-10009-01_060204
Prompt
Switch (Vlan) #
Switch (Config)#
Switch (Interface-"if
number")#
Switch (line) #
Switch (Config-policy-
map)#
Switch (Config-policy-
classmap)#
Switch (Config-class-
map)#
Switch (Config-router)#
Exit or Access Next
Mode
To exit to the Privileged
Exec mode, enter the
exit command, or press
Ctrl-Z to switch to user
exec mode.
To exit to the Privileged
Exec mode, enter the
exit command, or press
Ctrl-Z to switch to user
exec mode.
To exit to the Global
Config mode enter exit.
To return to user EXEC
mode enter ctrl-Z.
To exit to the Global
Config mode enter exit.
To return to User Exec
mode enter ctrl-Z.
To exit to the Global
Config mode enter exit.
To return to user EXEC
mode enter ctrl-Z.
To exit to Policy Map
mode enter exit. To
return to User Exec
mode enter ctrl-Z.
To exit to Global Config
mode enter exit. To
return to User Exec
mode enter ctrl-Z.
To exit to the Global
Config mode enter exit.
To return to User Exec
mode enter ctrl-Z.
Mode-based CLI