Table of Contents
Advertisement
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Format
Mode
Forwarding Database ID Fdbid (Forwarding database ID) indicates which forwarding
mtu
This command sets the maximum transmission unit (MTU) size (in bytes) for physical and port-
channel (LAG) interfaces. For the standard implementation, the range of <mtusize> is a valid
integer between 1522-9216.
Default
Format
Mode
no mtu
This command sets the default maximum transmission unit (MTU) size (in bytes) for the interface.
Format
Mode
network javamode
This command specifies whether or not the switch should allow access to the Java applet in the
header frame of the Web interface. When access is enabled, the Java applet can be viewed from the
Web interface. When access is disabled, the user cannot view the Java applet.
Default
Format
Mode
no network javamode
This command disallows access to the Java applet in the header frame of the Web interface. When
access is disabled, the user cannot view the Java applet.
Switching Commands
no bridge aging-time [fdbid | all]
Global Config
database's aging timeout is being configured. All is used to con-
figure all forwarding database's agetime. In an SVL system, the
[fdbid/all] parameter is not used and will be ignored if entered.
1522
mtu <1522-9216>
Interface Config
no mtu
Interface Config
Enabled
network javamode
Privileged EXEC
202-10009-01_060204
8-19
Advertisement
Table of Contents
