NETGEAR 7300 Series User Manual page 319

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Table 13-2. IS CLI Mapping (continued)
Package 7300 Series L3 Switch Command
Switching show traplog
Switching config sysname <name>
Switching config syslocation <location>
Switching config syscontact <contact>
Switching ping <ipaddr>
Switching reset system
Switching transfer upload mode <xmodem |
tftp>
Switching transfer upload serverip <ipaddr>
Switching transfer upload path <path>
Switching transfer upload filename <name>
Switching transfer upload datatype <config |
errorlog | msglog | traplog>
Switching transfer upload start
IS CLI Mapping
CLI Command
Mode
Privileged
EXEC
Global
Config
Global
Config
Global
Config
Privileged
EXEC and
User
EXEC
Privileged
EXEC
Privileged
EXEC
202-10009-01_060204
Syntax
show logging
snmp-server sysname <name>
snmp-server location <loc>
snmp-server contact <con>
ping <ipaddress>
reload
copy { { nvram:errorlog |
nvram:msglog | nvram:startup-config
| nvram:traplog } <url> } | {<url>
nvram:startup-config | system:image |
nvram:sshkey-rsa1 |
nvram:sshkey-rsa2 |
nvram:sshkey-dsa |
nvram:sslpem-root |
nvram:sslpem-server |
nvram:sslpem-dhweak |
nvram:sslpem-strong } |
{system:running-config
nvram:startup-config}
A-31