Table of Contents
Advertisement
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Mode
snmp-server enable traps bcaststorm
This command enables the broadcast storm trap. When enabled, broadcast storm traps are sent
only if the broadcast storm recovery mode setting associated with the port is enabled.
Default
Format
Mode
no snmp-server enable traps bcaststorm
This command disables the broadcast storm trap. When enabled, broadcast storm traps are sent
only if the broadcast storm recovery mode setting associated with the port is enabled.
Format
Mode
snmp-server enable traps linkmode
This command enables Link Up/Down traps for the entire switch. When enabled, link traps are
sent only if the Link Trap flag setting associated with the port is enabled (see 'snmp trap link-
status' command).
Default
Format
Mode
no snmp-server enable traps linkmode
This command disables Link Up/Down traps for the entire switch.
Format
Mode
8-32
Global Config
Enabled
snmp-server enable traps bcaststorm
Global Config
no snmp-server enable traps bcaststorm
Global Config
Enabled
snmp-server enable traps linkmode
Global Config
no snmp-server enable traps linkmode
Global Config
202-10009-01_060204
Switching Commands
Advertisement
Table of Contents
