User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Slot/Port
Type
STP State
Port Role
Link Status
Link Trap
show spanning-tree mst summary
This command displays summary information about all multiple spanning tree instances in the
switch. On execution, the following details are displayed.
Format
Mode
MST Instance ID List
For each MSTID:
Associated FIDs
Associated VLANs
show spanning-tree summary
This command displays spanning tree settings and parameters for the switch. The following details
are displayed on execution of the command.
Format
Mode
Spanning Tree Adminmode Enabled or disabled.
Spanning Tree Version Version of 802.1 currently supported (IEEE 802.1s, IEEE 802.1w,
Configuration Name
Configuration Revision Level Configured value.
8-82
The interface being displayed
Currently not used.
The forwarding state of the port in the specified spanning tree
instance
The role of the specified port within the spanning tree.
The operational status of the link. Possible values are "Up" or
"Down".
The link trap configuration for the specified interface.
show spanning-tree mst summary
Privileged EXEC and User EXEC
List of multiple spanning trees IDs currently configured.
List of forwarding database identifiers associated with this
instance.
List of VLAN IDs associated with this instance.
show spanning-tree summary
Privileged EXEC and User EXEC
or IEEE 802.1d) based upon the Force Protocol Version parame-
ter
TConfigured name.
202-10009-01_060204
Switching Commands