No Ip Route Distance; Ip Routing; No Ip Routing; Redistribute - NETGEAR 7300 Series User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Mode

no ip route distance

This command sets the default static route preference value in the router. Lower route preference
values are preferred when determining the best route.
Format
Mode

ip routing

This command enables the IP Router Admin Mode for the master switch.
Format
Mode

no ip routing

This command disables the IP Router Admin Mode for the master switch.
Format
Mode

redistribute

This command configures OSPF protocol to redistribute routes from the specified source protocol/
routers.
Default value for metric unspecified
Default value for type
Default value for tag
Format
Mode
9-32
Global Config
no ip route distance
Global Config
ip routing
Global Config
no ip routing
Global Config
2
0
redistribute {rip | bgp | static | connected} [metric
<0-16777215>] [metric-type {1 | 2}] [tag <0-
4294967295>] [subnets]
Router OSPF Config
202-10009-01_060204
Routing Commands