User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Mode
network protocol
This command specifies the network configuration protocol to be used. If you modify this value
change is effective immediately.
Default
Format
Mode
remotecon maxsessions
This command specifies the maximum number of remote connection sessions that can be
established. A value of 0 indicates that no remote connection can be established. The range is 0 to
5.
Default
Format
Mode
no remotecon maxsessions
This command sets the maximum number of remote connection sessions that can be established to
the default value.
Default
Format
Mode
Switching Commands
Privileged EXEC
None
network protocol {none | bootp | dhcp},
indicates that the switch periodically sends requests to a Boot-
strap Protocol (BootP) server or a dhcp server until a response is
received.
indicates that the switch should be manually con-
none
figured with IP information.
Privileged EXEC
5
remotecon maxsessions <0-5>
Privileged EXEC
5
no remotecon maxsessions
Privileged EXEC
202-10009-01_060204
where
bootp
8-21