Show Spanning-Tree Vlan; Spanning-Tree; No Spanning-Tree; Spanning-Tree Configuration Name - NETGEAR 7300 Series User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Configuration Digest Key Calculated value.
Configuration Format Selector Configured value.
MST Instances

show spanning-tree vlan

This command displays the association between a VLAN and a multiple spanning tree instance.
The <vlanid> corresponds to an existing VLAN ID.
Format
Mode
VLAN Identifier
Associated Instance

spanning-tree

This command sets the spanning-tree operational mode to enabled.
Default
Format
Mode

no spanning-tree

This command sets the spanning-tree operational mode to disabled. While disabled, the spanning-
tree configuration is retained and can be changed, but is not activated.
Format
Mode

spanning-tree configuration name

This command sets the Configuration Identifier Name for use in identifying the configuration that
this switch is currently using. The <name> is a string of at most 32 characters.
Switching Commands
List of all multiple spanning tree instances configured on the
switch
show spanning-tree vlan <vlanid>
Privileged EXEC and User EXEC
Identifier for the associated multiple spanning tree instance or
"CST" if associated with the common and internal spanning tree
Disabled
spanning-tree
Global Config
no spanning-tree
Global Config
202-10009-01_060204
8-83