Telnet; No Telnet; Http Commands; Ip Http Secure-Port - NETGEAR 7300 Series User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

telnet

This command regulates new telnet sessions. If sessions are enabled, new telnet sessions can be
established until there are no more sessions available. If sessions are disabled, no new telnet
sessions are established. An established session remains active until the session is ended or an
abnormal network error ends it.
Default
Format
Mode

no telnet

This command disables telnet sessions. If sessions are disabled, no new telnet sessions are
established.
Format
Mode

HTTP Commands

ip http secure-port

This command is used to set the sslt port where port can be 1-65535 and the default is port 443.
Default
Format
Mode

no ip http secure-port

This command is used to reset the sslt port to the default value.
Format
Mode
Switching Commands
Enabled
telnet
Privileged EXEC
no telnet
Privileged EXEC
443
ip http secure-port <portid>
Privileged EXEC
no ip http secure-port
Privileged EXEC
202-10009-01_060204
8-35