User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Last EAPOL Frame Version The protocol version number carried in the most recently
Last EAPOL Frame Source The source MAC address carried in the most recently
EAP Response/Id Frames Received The number of EAP response/identity frames that
EAP Response Frames Received The number of valid EAP response frames (other than
EAP Request/Id Frames Transmitted The number of EAP request/identity frames that
EAP Request Frames Transmitted The number of EAP request frames (other than
Invalid EAPOL Frames Received The number of EAPOL frames that have been
EAP Length Error Frames Received The number of EAPOL frames that have been
show dot1x users
This command displays 802.1x port security user information for locally configured users.
Format
Mode
User
show radius
This command is used to display the various RADIUS configuration items for the switch as well as
the configured RADIUS servers. If the optional token 'servers' is not included, the following
RADIUS configuration items will be displayed.
Format
Mode
Switching Commands
received EAPOL frame.
received EAPOL frame.
have been received by this authenticator.
resp/id frames) that have been received by this authenticator.
have been transmitted by this authenticator.
request/identity frames) that have been transmitted by this
authenticator.
received by this authenticator in which the frame type is not rec-
ognized.
received by this authenticator in which the frame type is not rec-
ognized.
show dot1x users <slot/port>
Privileged EXEC
Users configured locally to have access to the specified port.
show radius [servers]
Privileged EXEC
202-10009-01_060204
8-109