Table of Contents
Advertisement
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
show msglog
This command displays the message log maintained by the switch. The message log contains
system trace information.
The trap log contains a maximum of 256 entries that wrap.
Format
Mode
Message
Note: Message log information is not retained across a switch reset.
show running-config
This command is used to display the current setting of different protocol packages supported on
switch. This command displays only those parameters, the values of which differ from default
value. The output is displayed in the script format, which can be used to configure another switch
with same configuration.
Format
Mode
show sysinfo
This command displays switch information.
Format
Mode
Switch Description
System Name
System Location
8-14
GMRP Learned The value of the corresponding was learned via
GMRP and applies to Multicast.
Other The value of the corresponding instance does not fall into
one of the other categories.
show msglog
Privileged EXEC
The message that has been logged.
show running-config
Privileged EXEC
show sysinfo
Privileged EXEC
Text used to identify this switch.
Name used to identify the switch.
Text used to identify the location of the switch. May be up to 31
alpha-numeric characters. The factory default is blank.
202-10009-01_060204
Switching Commands
Advertisement
Table of Contents
