Registering A Computer That Is Connected - Oki MB492dn User Manual

Registering a Computer That is Connected

You can register a computer on the same network as a scanning destination.
1.
Press [Device Settings].
2.
Press [Network Scan Destination].
3.
Press [Register] of a registration location.
To edit a registered group number, select [Edit].
4.
Enter a destination in [Destination].
5.
Enter a destination.
You can enter up to 16 characters.
6.
Press [OK].
7.
Press [Destination Address].
8.
Enter an IP address, host name, or computer name.
You can enter up to 64 characters.
9.
Press [OK].
10.
Press [Port No.].
11.
Enter a port number, and then press [OK].
12.
Press [Close] on a confirmation screen.
13.
Press [Back] until the home screen is displayed.
89