Oki MB492dn User Manual page 651

View Information
You can check the device information of this machine.
1.
Press [Device Settings] on the touch panel.
2.
Press [View Information].
3.
Select an item.
The current setting is displayed.
4.
Press [Close].
5.
Press [Back] until the home screen is displayed.
Item
System Serial No.
Information
Asset No.
Lot No.
Firmware Version
CU Version
PU Version
Panel Version
Total Memory
Flash Memory
Network IPv4 Address
Subnet Mask
Gateway Address
MAC Address
NIC Program Version
IPv6 Address (Local)
IPv6 Address (Global)
Network
Information
Description
Indicates the serial number of this machine.
Indicates the asset number of this machine.
Indicates the production lot number of this machine.
Indicates the version of firmware.
Indicates the version of the control unit firmware.
Indicates the version of the print unit firmware.
Indicates the version of the panel firmware.
xx MB Indicates the total capacity of all RAM installed.
xx MB [Fxx] Indicates the total capacities of all flash memories.
Indicates the IPv4 address of this machine.
Display condition: [Admin Setup] > [Network Menu] > [Network Setup]
>[TCP/IP] is set to [Enable].
Indicates the subnet mask of this machine.
Display condition: [Admin Setup] > [Network Menu] > [Network Setup]
>[TCP/IP] is set to [Enable].
Indicates the Gateway address.
Display condition: [Admin Setup] > [Network Menu] > [Network Setup]
>[TCP/IP] is set to [Enable].
Indicates the MAC address of this machine.
Indicates the version of the network firmware.
Indicates the IPv6 address of this machine.
Display condition: [Admin Setup] > [Network Menu] > [Network Setup]
>[TCP/IP] is set to [Enable].
Indicates the IPv6 address of this machine.
Display condition: [Admin Setup] > [Network Menu] > [Network Setup]
>[TCP/IP] is set to [Enable].
Network Indicates the network connection method (wired LAN/wireless LAN) of this
Connection machine.
IPv4 Address Indicates the IPv4 address of this machine.
Display condition: [Admin Setup] > [Network Menu] > [Network Setup] >
[TCP/IP] is set to [Enable].
Subnet Mask Indicates the subnet mask of this machine.
Display condition: [Admin Setup] > [Network Menu] > [Network Setup] >
[TCP/IP] is set to [Enable].
Gateway Indicates the Gateway address.
Address
Display condition: [Admin Setup] > [Network Menu] > [Network Setup] >
[TCP/IP] is set to [Enable].
MAC Address Indicates the MAC address of this machine.
NIC Program Indicates the version of the network firmware.
Version
650