Cleaning The Document Feed Roller - Oki MB492dn User Manual

Cleaning the Document Feed Roller

If the document feed rollers in the ADF are contaminated with ink, toner particles or paper dust, documents and outputs get dirty and a
paper jam may occur.
Note
Do not use benzine, thinners, or alcohol. They may damage the plastic parts of the machine.
1.
Check the ADF cover.
2.
Open the ADF cover.
3.
Wipe the document feed roller (1), guide surface (2), rubber pad (3), and rubber sheet (4) with a soft
cloth that has been slightly moistened with water and squeezed well.
Wipe the whole surface of the roller while turning it with your hand.
Memo
If the document feed roller is very dirty, wipe gently with a soft cloth that has been moistened with neutral detergent and
squeezed well, and then wipe again with a soft cloth that has been slightly moistened with water and squeezed well.
4.
Close the ADF cover.
836