Unpacking And Installing The Machine - Oki MB492dn User Manual

Unpacking and Installing the Machine

This section describes how to unpack and install the machine.
Lift this machine by two or more persons, because it weighs approximately 29 kg.
Note
Use extra care when handling the image drum (the green cylinder), because it is fragile.
Do not expose the image drum to direct sunlight or strong light (approximately 1,500 lux or more). Even under room lighting, do
not leave the image drum for 5 minutes or more.
Packaging and cushioning material is required for transporting the machine. Do not dispose of it, and keep it for future use.
For details on paper feed to the machine, refer to
1.
Remove the machine from the box, and then remove cushioning material and the plastic bag from the
machine.
A set of accessories is packed within the cushioning material.
2.
Lift the machine, and then place it where it is to be installed.
Note
Do not open the scanner unit until step 10.
3.
Remove the protection tape (1) at the side of the machine, and then take the cushioning material (2)
out.
Injury may result.
"Loading Paper".
867