Using the Operator Panel
Enabling Auto Power Off
Setting the Transition Time
Enabling Auto Power Off
1.
Press [Device Settings] on the touch panel.
2.
Press [Admin Setup].
3.
Enter the administrator password.
The factory default password is "aaaaaa".
Entering Characters
4.
Press [OK].
5.
Press [User Install].
6.
Press [Power Setup].
7.
Press [Auto Power Off].
8.
Press [Enable].
Setting the Transition Time
1.
Press [Device Settings] on the touch panel.
2.
Press [Admin Setup].
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Press [OK].
5.
Press [Management].
6.
Press [Power Save].
7.
Press [Auto Power Off Time].
8.
Select transition time.
Available transition time settings:
1 hour,
2 hours,
* indicates the factory default setting.
3 hours,
4 hours*,
8 hours,
12 hours,
18 hours,
24 hours
535