Printing Transmission Results Automatically (Transmit Conf. Report) - Oki MB492dn User Manual

Printing Transmission Results Automatically (Transmit Conf. Report)

Set whether to automatically print transmission results.
Memo
To change the default value, change it from [Admin Setup] > [Fax Setup] > [Default Settings] > [Transmit Conf. Report].
1.
Press [Fax/Internet Fax] or the
The touch panel display switches to the fax/Internet fax top screen.
Memo
To display the home screen, press the
2.
Set a document in the ADF or on the document glass.
3.
Press [Fax].
4.
Press [Communicating Function] on the [Advanced] tab.
5.
Press [Transmit Confirmation].
[Transmit Conf. Report] is set to [ON].
Memo
Pressing [Transmit Conf. Report] switches between [ON] and [OFF].
6.
Specify a destination.
Specify a destination in one of the following ways.
Using Direct Entry
Selecting from the Phone Book
Using a One-touch Button
Selecting from the Transmission History and Reception History
7.
Change other settings if necessary, and then press the
Transmission starts.
Topics
You can change other settings for fax transmissions.
Setting Scanning for Transmission
(FAX) button.
(HOME) button.
364
(START) button.