Scanning Multiple Documents Continuously (Continuous Scan) - Oki MB492dn User Manual

Scanning Multiple Documents Continuously (Continuous Scan)

To scan multiple documents as a single job, enable Continuous Scan mode.
In Continuous Scan mode, you can scan your documents from the ADF, document glass, or both of them.
1.
Press [Scan] or the
The touch panel display switches to the scan top screen.
Memo
To display the home screen, press the
2.
Set the first sheet of a document in the ADF or on the document glass.
3.
Select a scan method.
Sending Scanned Data as an E-mail Attachment (Scan to E-mail)
Saving Scanned Data in USB Memory (Scan to USB Memory)
Saving Scanned Data in a Shared Folder (Scan to Shared Folder)
Specify a destination by following the procedure for the selected scan method.
The (START) button lights up.
4.
Follow the procedure in the table below for the selected scan method.
Scan method
Scan To E-mail
Scan To USB Memory
Scan To Shared Folder
5.
Press [Continuous Scan].
[Continuous Scan] is set to [ON].
Memo
Pressing [Continuous Scan] switches between [ON] and [OFF].
6.
Change other settings if necessary, and then press the
Scanning starts.
7.
When the [Please set next document] screen is displayed, set the next document in the ADF or on the
document glass.
(SCAN) button.
(HOME) button.
Display on the touch panel and operation procedures
[Advanced] tab > [Continuous Scan]
[Basic] tab > [Continuous Scan]
[Basic] tab > [Continuous Scan]
(START) button.
130