Oki MB492dn User Manual page 592

Paper is not fed from Tray 2 (optional) is not set with
Tray 2 (optional). the printer driver.
Even after the jammed -
paper was removed,
the machine does not
work.
Paper is curled. Paper The paper is damp or has a static
is creased. charge.
The paper is light.
The paper twists The settings of media weight and
around the rollers in type are incorrect.
the fuser unit.
The paper is light.
There are nearly solid fill on the
leading edge of the paper.
The paper is twinkled The paper is damp.
when printing on
envelopes.
The machine is printing when the
temperature and humidity
conditions are high.
If you cannot solve a problem with
the above solutions
Set Tray 2 (optional) with the printer driver.
Open and close the top cover.
Use paper stored under proper temperature
and humidity conditions.
Press [Device Settings], select [Paper Setup] >
[(tray name)] > [Media Weight], and then
specify a lighter weight.
Press [Device Settings], select [Paper Setup] >
[(tray name)] > [Media Type]/[Media Weight],
and then specify the appropriate values.
Alternatively, specify heavier weight in [Media
Weight].
Use heavier paper.
Insert a margin into the leading edge of the
paper.
For duplex printing, insert a margin into the
bottom edge of the paper as well.
Use paper stored under proper temperature
and humidity conditions.
Set [High Humid Mode] of [User Install] to
[ON] on [Admin Setup].
Load the envelope with the flap (for gluing) on
the printer side, and then set the reverse page
orientation (180°) on the printing preferences.
591
Installing the Second
Tray Unit (Optional)
to the Machine
-
About Paper Types
That Can be Loaded
and Storage Methods
Registering the Paper
Size, Type, or Weight
Registering the Paper
Size, Type, or Weight
-
-
About Paper Types
That Can be Loaded
and Storage Methods
User Install
About Screens and
Functions of Each
Printer Driver