Cancelling a Setting
If you set multiple copy functions at the same time, you may not be able to use these functions depending on the combination. In such a
case, a message is displayed.
For example, if [Margin] is specified, [N-in-1] and [Repeat] cannot be set.
Cancel the setting of a function with low priority among the ones that are displayed in the message, and then set the function you want
to use again.
To cancel the setting of any function, reset the setting to the default setting.
Memo
Some functions cannot be used in combination with other functions.
If you have changed the default value from the factory default setting, select the changed default value.
Administrator Setup
1.
Select a function to cancel on each tab on the copy top screen or from [Function Settings].
2.
Set the default setting again.
61